INSTRUCTIONS
D A N V I L L E ENAMEL BOND
E-BondTM is a light cure, bis-GMA based bonding agent, a typical “enamel bond”. It is
used for bonding to etched enamel and for bonding to silane treated porcelain. It is
also an excellent lubricant to prevent sticking of composites to instruments.
DIRECTIONS FOR USE
After etching of enamel with a phosphoric acid such as Sure EtchTM, apply the E-Bond
with a brush or other applicator. It does not require thinning since it does not contain
any solvent. Light cure and proceed with composite application.
STORAGE
The shelf life of E Bond is 2 years when stored at 77ºF (25ºC) or below.
E-BondTM
E BOND MATERIAL SAFETY DATA SHEET
SECTION I - PRODUCT IDENTIFICATION
Trade name: E-Bond
Manufacturer/supplier: Danville Materials
2021 Omega Rd Ste 120
San Ramon, Ca. 94583 USA
Emergency information: Craig Bruns
(800) 822-9294
SECTION II - COMPOSITION/INFORMATION OF INGREDIENTS
Product Contents: light-cure bonding agent liquid
Hazardous Ingredients: none
SECTION III - HAZARDS IDENTIFICATION
For potential health hazards: SEE section X & XI below
No other significant hazards to man or the environment are reasonably foreseen.
SECTION IV - FIRST-AID MEASURES
Inhalation: no harm anticipated
Skin Contact: wash with soap and water
Eye Contact: flush with copious amounts of water
Ingestion: induce vomiting if large amount of material is
swallowed.
SECTION V - FIRE FIGHTING MEASURES
Suitable Extinguishing Media: water
Unsuitable Extinguishing Media: none
Special Exposure Hazards From
Combustion Products: none
Special Equipment For Fire-Fighting: none
SECTION VI - ACCIDENTAL RELEASE MEASURES
Personal Precautions: avoid contact of skin or eyes, wash hands
with soap and water if skin contact occurs
Environmental Precautions: dispose of in accordance to all federal, state,
and local regulations
Methods For Clean Up: wipe up with soap, water, and paper towels.
MATERIAL SAFETY DATA SHEET Prepared: October 23, 2002
89109-00 REV B
E BOND MATERIAL SAFETY DATA SHEET
SECTION VII - HANDLING AND STORAGE
Handling Precautions: none
Safe Storage Conditions: store at temperatures not exceeding 750F
(240C)
Other Restrictions or
Recommendations: avoid exposure to moisture and light
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Protection & Ventilation: not required
Protective Clothing or Equipment: not required under normal handling
Unusual Work/Hygienic Practices: avoid prolonged contact with skin
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Appearance: clear liquid Odor: s light acr y l i c
odor
pH: n.a. Boiling Point: n.a.
Melting Point: n.a. Flash Point n.a.
Auto-Ignition Temp.: n.a. Flammability: no
Explosive Limits in Air: n.a. Oxidizing Properties: none
Vapor Pressure (mm Hg): negligible at room temp.
Vapor Density (Air=1): >1 Specific Gravity (H20=1): ~1
Solubility in Water: insoluble Reactivity in Water: not reactive
SECTION X - STABILITY AND REACTIVITY
Stability: generally stable
Conditions of Instability: avoid exposure to light
Incompatibility with Various Substances: none
Hazardous Decomposition Products: none
Hazardous Polymerization: may occur upon exposure to light where
large quantities of material are involved
Conditions to Avoid: avoid exposure to light and temperatures above 800F
SECTION XI - TOXICOLOGICAL INFORMATION
Potential Acute Health Effects: possibility of skin irritation or sensitization if
not washed off promptly
Potential Chronic Health Effects: possibility of skin sensitization or irritation
upon prolonged or repeated exposure
Signs and Symptoms of Exposure: skin/eye irritation
Medical Conditions Generally
Aggravated by Exposure: none known
Carcinogenic or Potential
Carcinogenic Effects: no ingredient listed as a carcinogen
Other Potential Health Effects: none known
SECTION XII - ECOLOGICAL INFORMATION
No ecological damage or impact anticipated when handled as indicated.
SECTION XIII - DISPOSAL CONSIDERATION
Waste Disposal: do not dispose into sink, dispose of in accordance
with all federal, state, and local regulations.
SECTION XIV - TRANSPORT INFORMATION
UN Classification: n.a.
Identification: n.a.
Special Provisions for Transport: avoid elevated temperatures and high
intensity light
SECTION XV - REGULATORY INFORMATION
U.S. FDA Dental Device: Class II product
EC Medical Device Directive: Class IIa product
SECTION XVI - OTHER INFORMATION
Some of the information presented and conclusions drawn herein are from sources other
than direct test data on the product itself. The information in the MSDS was obtained
from sources that we believe are reliable. However, the information is provided without
any warranty, express or implied, regarding its correctness. The condition or method of
handling, storage, use and disposal of the product are beyond our control and may be beyond
our knowledge. For this and other reasons, we do not assume responsibility and expressly
disclaim liability for loss, damage, or expense arising out of or in any way connected with
the handling, storage, use or disposal of the product. If the Product is used as a component
in another product or used in a way other than recommended by the Company, the MSDS
information may not be applicable.
2021 OMEGA ROAD STE 120 SAN RAMON, CALIFORNIA 94583 USA
PHONE 800/822-9294 FAX 925/838-0944
D A N V I L L E
M A T E R I A L S
89109-00 REV B