MSDS Name: FastSteel® Version Number 3 Page Number: 1 of 4
MSDS Number: 4-510 MSDS Date: 11/13/2002
MATERIAL SAFETY DATA SHEET
SECTION I - PRODUCT AND COMPANY INFORMATION
Product Name: FastSteel®
CAS Number: Mixture
Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPI: B
Company Identification: POLYMERIC SYSTEMS, INC.
723 WHEATLAND STREET
PHOENIXVILLE PA 19460
Contact: I. David Crossan
Telephone/Fax: (610) 935-1170 / (610) 935-7123
Emergency Phone (24 Hour): (800) 424-9300
(610) 935-1170
Chemtrec (24 Hour): (800) 424-9300
Preparer: I. David Crossan
Technical Director
Product Class: EPOXY PUTTY
Trade Name: FastSteel®
Product Code: 4510
Shipping Name: PUTTY, NMFC 150110
SECTION II - INGREDIENT AND HAZARD INFORMATION
Ingredient Name CAS Number Percent TSCA
Glycidyl ethers of bisphenol A resins 25068-38-6 10 - 30 Y
HMIS Health: 2 Fire: 1 Reactivity: 0 PPI: B
Tri(dimethylaminomethyl)phenol 90-72-2 0.5 - 1.5 Y
HMIS Health: 3 Fire: 1 Reactivity: 1 PPI: D
*** ALL Ingredients in this product are listed in the T.S.C.A. Inventory
SECTION III - PHYSICAL DATA
Form: Putty
Appearance/Color: Metallic/Black
Odor: Mercaptan/Sulfur
Solubility (in water): Insoluble in Water
pH Value: Not Applicable
Boiling Range: Not Applicable
Vapor Pressure (mmHg): Not Applicable
Melting Point: Not Applicable
Evaporation Rate: Non-Volatile
Vapor Density: Non Volatile
% Volatile Weight: 0.%
% Volatile: < 1%
VOC: < 1.0 %
Heavy Elements (ppm): 0.
Specific Gravity 2.18
NOTE:
The physical data represented above are typical values and should not be construed as a specification. For
additional physical data and details on use, please obtain a technical data sheet for this product.
Distributed by: Manufactured by:
MAINTENANCE MAGIC POLYMERIC SYSTEMS, INC.
IBS, INC. 725 Wheatland Streeet
` 740 Clay St. NW Phoenixville, PA 19460
Auburn, WA 98001
EZ POXY 200 IBS No. 74502
EZ-POXY 200
MSDS Name: FastSteel® Version Number 3 Page Number: 2 of 4
MSDS Number: 4-510 MSDS Date: 11/13/2002
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flammability Class: IIIB
Flash Range: none
Explosive Range: none
EXTINGUISHING MEDIA:
Water spray, foam, CO2, dry chemicals.
UNUSUAL HAZARDS:
Aldehydes, acids, and oxides of carbon, nitrogen, and sulfur.
FIRE FIGHTING
Fire Fighters and others who may be exposed to the products of combustion should be equipped with NIOSHapproved
positive pressure self-contained breathing apparatus (SCBA) and full protective clothing.
SECTION V - HEALTH HAZARD DATA
Route Species Exposure and Dose
Glycidyl ethers of bisphenol A resins
Oral Rat, adult LD50 5000. mg/Kg
Skin Rabbit, adult LD50 20000. mg/Kg
Tri(dimethylaminomethyl)phenol
Oral Rat, adult LD50 1630. mg/Kg
PERMISSIBLE EXPOSURE LEVEL:
Not Applicable
EFFECTS OF OVEREXPOSURE:
Inhalation: None
Ingestion: Irritation of intestinal tract
Skin Contact: Possible irritant and sensitizer.
Eye Contact: Possible irritant and sensitizer.
FIRST AID
Inhalation: Remove to fresh air.
Ingestion: Seek medical advice.
Skin Contact: Wash with plenty of soap and water.
Eye Contact: Flush with water for at least 15 minutes. Seek medical advice.
NOTE:
Never give anything by mouth to an unconscious person.
SECTION VI - STABILITY AND REACTIVITY DATA
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATIBILITY
None
CONDITIONS TO AVOID:
None
HAZARDOUS DECOMPOSITION PRODUCTS:
Aldehydes, acids, and oxides of carbon, nitrogen, and sulfur.
MSDS Name: FastSteel® Version Number 3 Page Number: 3 of 4
MSDS Number: 4-510 MSDS Date: 11/13/2002
SECTION VII - SPILL AND LEAK PROCEDURES
STEPS TO BE TAKEN:
Spills or leaks: Dispose of in normal manner.
WASTE DISPOSAL METHOD:
Incinerate in furnace or bury in landfill in accordance with all applicable regulations; not a hazardous waste.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
Glycidyl ethers of bisphenol A resins
N/est N/est N/est N/est N/est
Tri(dimethylaminomethyl)phenol
5.00 PPM N/est N/est N/est N/est
PROTECTIVE EQUIPMENT TYPES:
Eyes: Safety glasses or goggles.
Respiratory: None required unless sanding or abrading.
Gloves: Appropriate impervious gloves. Because a variety of protective gloves exist,
consult glove manufacturer to determine the proper type for a specific
operation.
Other: None Required.
VENTILATION:
General Mechanical: None Required
Local Exhaust: Only if heated above 100F (38C)
SECTION IX - HANDLING AND STORAGE
Storage Temperature: < 90F (32C)
Storage Conditions: Store in cool, dry, well ventilated area.
Transfer: No special precautions are needed. Follow good manufacturing and handling practices.
Personal Hygiene: Wash thoroughly after handling, especially before eating, drinking, smoking and using restroom
facilities. Wash contaminated goggles, face shield, and gloves. Professionally launder contaminated clothing
before re-use.
Empty container precautions: Attention! This container can be hazardous when empty. Follow label cautions even
after the container is empty since empty containers could retain product residues. Do not re-use empty containers
for food, clothing, or products for human or animal consumption, or where skin contact can occur.
MSDS Name: FastSteel® Version Number 3 Page Number: 4 of 4
MSDS Number: 4-510 MSDS Date: 11/13/2002
SECTION X - REGULATORY INFORMATION
Right-to-Know:
The non-hazardous ingredients in this product subject to the Pennsylvania, New Jersey, and/or Massachusetts Rightto-
Know laws are:
CAS Name
14807-96-6 Magnesium Silicate Hydrate
Trade Secret Polyether Polymercaptan
65997-17-3 Sodium Calcium Magnesium Silicate
7439-89-6 Iron/Silicon/Titanium/Aluminum Alloy
NOTE:
USERS RESPONSIBILITY: A bulletin such as this cannot be expected to cover all possible individual situations. As the
user has the responsibility to provide a safe workplace, all aspects of an individual operation should be examined to
determine if, or where, precautions - in addition to those described herein - are required. Any health hazard and
safety information herein should be passed on to your customers or employees as the case may be.
DISCLAMER OF LIABILITY: The information contained herein is, to the best of our knowledge and belief, accurate.
However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and
assume no liability for damages incurred by the use of this material. All chemicals may present unknown health
hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards that exist. Final determination of suitability of the chemical is the sole responsibility of
the user. No representation or warranties, either expressed or implied, of merchantability, fitness for a particular
purpose or any other natures are made hereunder with respect to the information refers. It is the responsibility of
the user to comply with all applicable federal, state and local laws and regulations.