Section 6 : ACCIDENTAL RELEASE MEASURES
Leak/Spill: Contain the spill.
Prevent entry into drains, sewers, and other waterways.
Area will be slippery until cleaned.
Wear appropriate protective equipment.
Wipe or scrape up spilled material.
Wash spill area after material pick up is complete.
Transfer to an approved container for disposal or recovery.
Observe precautions from other sections.
Follow applicable OSHA (29 CFR 1910.120), state and local regulations.
Section 7 : HANDLING AND STORAGE
Handling procedures and equipment: Wash thoroughly after using, particularly before eating or smoking.
Do not eat, drink or smoke in handling area.
Avoid contamination of cigarettes or other tobacco products.
Launder contaminated clothing prior to reuse.
Users should be alert to the possibility that very small percentages of the population may display
unexpected allergic reactions to otherwise innocuous industrial lubricants and raw materials.
Storage requirements: Store away from incompatible materials.
Do not store in open or unlabelled containers.
Section 8 : EXPOSURE CONTROLS / PERSONAL PROTECTION
Precautionary Measures
Gloves/Type:
Chemical resistant gloves.
Avoid skin contact.
Respiratory/Type: None required under normal use.
If exposure limit is exceeded, wear a NIOSH approved respirator.
Avoid breathing oil mist.
Eye/Type: Avoid eye contact.
Safety glasses, goggles or face shield.
In accordance with OSHA 29 CFR 1910.133.
Footwear/Type: Safety shoes per local regulations.
Clothing/Type: Wear adequate protective clothes.
Apron
Other/Type: Eye wash facility should be in close proximity.
Emergency shower should be in close proximity.
Ventilation requirements: Local ventilation is generally not necessary under normal conditions of use with adequate
general ventilation. Ventilation and other forms of engineering controls are the preferred means
for controlling chemical exposures.

 FLUOROCARBON GEL 868VH
 Page 3 of 5