DRYDEN OIL COMPANY -- 75W ALL PURPOSE GEAR LUBRICANT -- 9150-01-035-5390 
=====================  Product Identification  =====================

Product ID:75W ALL PURPOSE GEAR LUBRICANT
MSDS Date:01/14/1988
FSC:9150
NIIN:01-035-5390
MSDS Number: BKHVF
=== Responsible Party ===
Company Name:DRYDEN OIL COMPANY
Address:9300 PULASKI HIGHWAY
City:BALTIMORE
State:MD
ZIP:21220
Info Phone Num:(301) 574-5000
Emergency Phone Num:(301) 574-5000
CAGE:40310
=== Contractor Identification ===
Company Name:DRYDEN OIL CO INC
Address:9300 PULASKI HWY
Box:City:BALTIMORE
State:MD
ZIP:21220
Country:US
Phone:301-574-5000
CAGE:40310
Company Name:WARD'S AUTO PARTS, INC.
CAGE:WARDS

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
    PARAFFINIC, LUBRICATING OIL BASE STOCK
CAS:64741-88-4
RTECS #:PY8040500
Fraction by Wt: <85%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM

Ingred Name:RESIDUAL OILS (PETROLEUM), HYDROTREATED
CAS:64742-57-0
Fraction by Wt: <85%
ACGIH TLV:5 MG/CUM

Ingred Name:ADDITIVES (PROPRIETARY COMPOSITION)
Fraction by Wt: <15%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION/SKIN/EYES/INGESTION:
    IRRITATION, INJURY, OR DEATH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION/SKIN/EYES/INGESTION: IRRITATION,
    INJURY, OR DEATH.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE
    VOMITING. INHALATION: ADMINISTER OXYGEN, IF AVAILABLE. IF
    OVEREXPOSED TO OIL MIST, REMOVE TO FRESH AIR UNTIL EXCESSIVE MIST
    OIL CONDITION SUBSI DES. SKIN: WASH THOROUGHLY W/SOAP & WATER.
    REMOVE BY USING WATERLESS HAND CLEANERS. OBTAIN MEDICAL ATTENTION
    IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:366-453F
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:WATER SPRAY/FOG, DRY CHEMICAL, FOAM, CO2, OR
    VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
    COOL. USE WATER SPRAY TO DISPERSE THE VAPORS/PROVIDE PROTECTION IF
    LEAK OR SPILL HAS NOT IGNITED.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND/EARTH/OTHER
    SUITABLE ABSORBENT MATERIAL TO THE SPILL AREA. KEEP OUT OF
    SEWERS/WATERCOURSES INCLUDING INTERMITTENT DRY CREEKS/EXTENSIVE
    LAND AREAS BY DIKING/IMPOUNDING. U SE WATER SPRAY TO FLUSH SPILLS
    AWAY FROM EXPOSURE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID INHALATION OF VAPORS & CONTACT
    W/SKIN & EYES. AVOID HEAT/OPEN FLAMES/OXIDIZING MATERIALS/SPARKS.
    KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE & CAN BE DANGEROUS.
    DON'T PRESSURIZE/CUT/WELD/BRAZE/SOLDER/DRILL/GRIND/EXPOSE TO
    IGNITION SOURCES. DON'T ATTEMPT TO CLEAN SINCE RESIDUE IS DIFFICULT
    TO REMOVE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE SUPPLIED AIR BREATHING EQUIPMENT FOR
    ENCLOSED OR CONFINED SPACES OR AS OTHERWISE NEEDED.
Ventilation:OPEN ALL WINDOWS & DOORS TO ENSURE ADEQUATE VENTILATION.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING/SHOES
    BEFORE REUSE. DISCARD IF OIL-SOAKED. WASH BEFORE EATING/END OF WORK
    PERIOD.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity:0.8772-0.9076
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, DARK AMBER LIQUID W/MILD, BLAND PETROLEUM
    ODOR.
Percent Volatiles by Volume:NEGL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT, SPARKS, PILOT LIGHTS, STATIC
    ELECTRICITY, OPEN FLAMES, & SOURCES OF IGNITION
Hazardous Decomposition Products:FUMES/SMOKE/CO/SULFUR
    OXIDES/ALDEHYDES/PRODUCTS OF INCOMPLETE COMBUSTION/AIRBORNE
    SOLID/LIQUID PARTICULATES & GASES

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY DRUMS SHOULD BE COMPLETELY DRAINED,
    PROPERLY BUNGED, & PROMPTLY RETURNED TO A DRUM RECONDITIONER. ALL
    OTHER CONTAINERS SHOULD BE DISPOSED OF IN AN ENVIRONMENTALLY SAFE
    MANNER & IN ACCORDANCE W/A LL APPLICABLE GOVERNMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.