JET LUBE -- KOPR-SHIELD -- 9150-00N035238 
=====================  Product Identification  =====================

Product ID:KOPR-SHIELD
MSDS Date:08/02/1993
FSC:9150
NIIN:00N035238
MSDS Number: BZLWC
=== Responsible Party ===
Company Name:JET LUBE
Address:4849 HOMESTEAD RD
City:HOUSTON
State:TX
ZIP:21258
Country:US
Info Phone Num:713-674-7617
Emergency Phone Num:713-674-7617
Preparer's Name:DA OLDIGES
CAGE:IO394
=== Contractor Identification ===
Company Name:JET LUBE
Address:4849 HOMESTEAD RD
Box:City:HOUSTON
State:TX
ZIP:21258
Country:US
Phone:713-674-7617
CAGE:IO394
Company Name:JET-LUBE INC
Address:4849 HOMESTEAD RD
Box:21258
City:HOUSTON
State:TX
ZIP:77026
Country:US
CAGE:0A307

=============  Composition/Information on Ingredients  =============

Ingred Name:SOLVENT REFINED HYDROTREATED RESIDUAL OIL; (PETROLEUM OIL)
CAS:64742-57-0
Fraction by Wt: <65%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT DEWAXED RESIDUAL OIL (PETROLEUM)
CAS:64742-62-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CARBONIC ACID, CYCLIC PROPYLENE ESTER; (ALKYLENE CARBONATE)
CAS:108-32-7
RTECS #:FF9650000
Fraction by Wt: <1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:QUATERNARY AMMONIUM COMPOUNDS, BIS(HYDROGENATED TALLOW
    ALKYL)DIMETHYL-, SALT WITH BENTONITE; (BENTONE)
CAS:68953-58-2
RTECS #:UZ2996400
Fraction by Wt: <4%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:COPPER; (COPPER FLAKE) (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: <30%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: REDNESS AND IRRITATION OF SKIN.
    CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:REPEATED SKIN CONTACT FOR PERSONS
    HYPERSENSITIVE TO PETROLEUM PRODUCTS CAN CAUSE REDNESS AND
    IRRITATION OF SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: CLEAR AIR PASSAGE, CALL MD. INGESTION: CALL MD.
    EYES: WASH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15
    MINUTES. SKIN: REMOVE BY WIPING, OR WATERLESS HAND CLEANER,
    FOLLOWED BY WASHING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>560F,>293C
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:USE FOAM, DRY CHEMICAL, WATER SPRAY (FOG), CARBON
    DIOXIDE OR VAPORIZING LIQUID-TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCOOP UP EXCESS, WIPE UP WITH RAGS, PICK-UP
    RESIDUE WITH DIATOMACEOUS EARTH TO AVOID WALKING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NORMAL PRECAUTIONS AS WITH ANY
    PETROLEUM PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>700F,>371C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:1.20 (H*2O=1)
Evaporation Rate & Reference:<0.01 (N-BU AC=1)
Solubility in Water:NONE
Appearance and Odor:COPPER COLORED PASTE, WITH PETROLEUM ODOR
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS AND COPPER REACTIVE AGENTS.
Stability Condition to Avoid:STRONG OXIDIZING MATERIALS AND COPPER
    REACTIVE AGENTS.
Hazardous Decomposition Products:HYDROGEN, CARBON MONOXIDE, ALDEHYDES,
    SMOKE, FUMES, AND TOXIC COPPER COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT FEDERAL, STATE AND LOCAL REGULATIONS FOR
    PETROLEUM PRODUCTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.