LUB<>LINE CORPORATION Material Safety Data Sheet 650 N. Sam Houston Pkwy E. Suite 215 Houston, Texas 77060 Tel 281-260-8300 Fax 281-260-6888 Email sales@lubline.com Web www.lubline.com 1 GENERAL INFORMATION Identification WHITE PETROLEUM JELLY July 2002 Name of Contact Emergency Tele No. Product Material: Product Description: Trade Name: Chemical Name & Synonyms: Chemical Family: LUB<>LINE Corporation 650 N Sam Houston Pkwy E 215 Houston, Texas 77060 (281)260-8300 CHEMTREC 1-800-424-9300 or 703-527-3887 Petroleum Petrolathum Mixture of saturated petroleum hydrocarbons Aliphatic/ Alieyclic Alkanes Predominantly branched chain hydrocarbons H 0 F 1 R 0 PE SECTION 2: COMPOSITION/ INFORMATION ON INGREDIENTS SECTION 3: Hazard Identification/Adverse Human Health I. Inhalation none expected. Nuisance effect in high concentrations II. Skin Contact Molten materials will produce thermal burns III. Eye Contact Any material in eye, nuisance effect. Consult physician if symptoms Persist. IV. Ingestion None expected. Considered an unlikely event, Non-toxic V. Delayed effects after Exposure None Expected SECTION 4: FIRST AID MEASURES I. Inhalation Not expected II. Skin Contact If burned by contact with molten material cool as quickly as possible with water and see a physician for treatment of burn (A) OSHA HAZARDOUS COMPONENTS (B) NON-CLASSIFIED Substances Emergency Overview: White waxy solid, low odor (29 CFR 1910. 1200): NONE None Will burn in fire. LUB<>LINE CORPORATION Material Safety Data Sheet 650 N. Sam Houston Pkwy E. Suite 215 Houston, Texas 77060 Tel 281-260-8300 Fax 281-260-6888 Email sales@lubline.com Web www.lubline.com 2 III. Eye Contact Any material in eyes should be washed out and medical attention obtained if symptoms persist. IV. Ingestion Contact medical personnel. _______________________________________________________________________________ SECTION 5: Fire & Explosion Hazard Data Flashpoint (COC) Above 230 C / 440 F Flammable Limits (% By Volume At) Lower- No data Upper- No data Requires exposure to high temperature & naked flame Auto ignition Temperature Not Established Suitable Extinguishing Media Dry chemical, carbon dioxide or foam Viscosity @ 100 C 6-25 cST Percentage volatile by volume (%) Solid Evaporation rate (butyl acetate =1) Not applicable Extinguishing media that must not be used Water Decomposition/Combustion products Carbon monoxide, carbon dioxide, pyroylsed Hydrocarbons Special Fire Fighting Procedures Treat as petroleum oil fire Special Protective Fire Fighting equipment Full-Face, positive pressure, self-contained Breathing apparatus and full protective clothing Fire & Explosive Conditions Slight when exposed to heat or flame- Dense smoke may be generated while burning. SECTION 6: ACCIDENTAL RELASE MEASURES/ SPILLS AND LEAKS _____________________________________________________________________________________ Personal Precautions Safety glasses, chemical goggles (if splashing possible) Heat resistant gloves for handling molten material. Environmental Precautions No adverse environmental effects anticipated. Cleaning Up Method Allow to solidify, scrape up and teat as solid combustible material. This product is a non- hazardous waste when spilled or disposed of as defined in Resource Conversation Recovery Act (RCRA) regulations (40 CFR 261). ______________________________________________________________________________________ SECTION 7: HANDLING & STORAGE Precautions for Safe Handling No special precautions other than protection from splashing or contact with molten material. Conditions for safe Storage Store in dry conditions, away from boilers and hot pipes. LUB<>LINE CORPORATION Material Safety Data Sheet 650 N. Sam Houston Pkwy E. Suite 215 Houston, Texas 77060 Tel 281-260-8300 Fax 281-260-6888 Email sales@lubline.com Web www.lubline.com 3 SECTION 8: EXPOSURE CONTROL/ PERSONAL PROTECTION O ccupational Exposure Standard. 8 hr TWA 2 mg/m3 (wax fume) Occupational Exposure Standard 6 min Ref., 10 mg/m3 (wax fume) Precautionary Engineering Measures In high concentration conditions, local exhaust ventilation. Respiratory Protection If concentration likely to exceed TLV, suitable organic vapor mask. Hand Protection Impervious gloves Eye Protection Glasses or goggles Skin Protection Protective overalls SECTION 9: PHYSICAL & CHEMICAL PROPERTIES Appearance Snow White Translucent, soft mass odorless and tasteless Odor None Solubility Insoluble in water, and alcohol. Soluble in chloroform, In ether, & in petroleum spirit, the solution sometimes Showing a slight opalescence, practically incoluble in Ethanol (96%). Specific Gravity @ 60ēC 0.823 Flash Point (COC) 230ēC (440ēF) Melting Point 46ē-60ēC Acidity or Alkalinity Pass (I.P. 1996 Test) Organic Acid 0.08 max. Organic Impurities Pass Loss on drying 0.05% Sulfated Ash 0.05%(limit max 0.1%) Insert depth (150g) 0.1nm. 175-210 (limit 100 to 300) Volatil Matter 0.6 to 0.8% Relative density (H20 = 1) 0.92 approximately Water Solubility (% by weight) Insoluble Viscosity @ 100 C 6-25 cST Percentage volatile by volume (%) Solid SECTION 10: STABILITY & REACTIVITY Stability/Conditions to avoid Stable Incompatibility/ Materials to avoid Water Hazardous decomposition Products Carbon monoxide Hazardous Polymerization Will not occur LUB<>LINE CORPORATION Material Safety Data Sheet 650 N. Sam Houston Pkwy E. Suite 215 Houston, Texas 77060 Tel 281-260-8300 Fax 281-260-6888 Email sales@lubline.com Web www.lubline.com 4 SECTION 11: TOXICOLOGICAL INFORMATION Hazardous Ingredients None Immediate Health Effects None expected Delayed Health Effects None expected Acute Effects (short term) None expected Chronic Effects (long term) None expected SECTION 12: ECOLOGICAL INFORMTION Environmentally dangerous ingredients None Mobility Solid Persistence and Degradability Very slow biodegradation Bioaccumulative Potential Not available Aquatic toxicity Not available Marine Pollutant (IMDG guide) No SECTION 13: DISPOSAL CONSIDERATIONS Disposal of waste materials Treat as solid, combustible material Disposal of waste containers Normal industrial waste Disposal Restrictions Compliance with local, state, & Federal Laws & regulations Statutory Notification Required See above SECTION 14: TRANSPORT/LABEL INFORMATION _____________________________________________________________________________ D.O.T. Classification Not regulated UN Number None UN Packaging group None IMDG Classification Not applicable Special precautions Re carriage None required Symbol Not applicable SECTION 15: REGULATORY INFORMATION OSHA STATUS: This product is not hazardous under the criteria of the Federal OSHA hazard Communication Standard 29 CFR 1910.1200. However, thermal processing and decomposition fumes form this product may be hazardous as noted in Sections 2 and 3. TSCA STATUS: On TSCA Inventory CERCLA Reportable Quantity: None LUB<>LINE CORPORATION Material Safety Data Sheet 650 N. Sam Houston Pkwy E. Suite 215 Houston, Texas 77060 Tel 281-260-8300 Fax 281-260-6888 Email sales@lubline.com Web www.lubline.com 5 SARA TITLE III. SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES: None SECTION 311/312 HAZARD CATERGORIES: Non-hazardous Under Section 311/312 SECTION 313 TOXIC CHEMICALS: None RCRA STATUS: If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal, whether a material containing the product or derived from the product should be classified as a hazardous waste. (40 CFR 261.20-24) INTERNATIONAL REGULATIONS CANADIAN WHIMS: Compiles CANADIAN ENVIRONMENTAL PROCTECTION ACT: All components of this product are on the Domestic Substances List (DSL). EINECS: All components are on the European Inventory of Existing Commercial Chemical Substances. STATE REGULATIONS There are no known additional requirements necessary for compliance with state Right-To- Know regulations. ……………………………………………………………………………………………………… SECTION 16: ANY OTHER HEALTH & SAFETY INFORMATION Label Hazard Ratings: NFPA: Fire-1 Health-0 Reactivity-0 Specific Hazard None HMIS: Health-0 Flammability-1 Reactivity-0 PPI-B Recommended uses and restrictions: See Below Source of key information used to compile MSDS, ANSI Z400.1-1993 User responsibility. The information herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. In submitting this information, no liability is assumed or license or other rights express or implied given with respect to any existing or pending patent, patent applications or trademarks. The observance of all legal regulations and patent is the responsibility of the user. Appropriate warning and safe handling procedures should be provided to handlers and users