=======================================================
MSDS Safety Information 
=======================================================

NAME: ACID AWAY ACID NEUTRALIZER

=======================================================


MATERIAL SAFETY DATA SHEET- ACID-AWAYŌ
MSDS0165
Ver. No.1
Ver. Date December 8, 2000
Page 1 of 2
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Acid-AwayŌ
PRODUCT CODE: 45004
CHEMICAL FAMILY: Organic
USE: Compressor Burnout Acid Neutralizer
MANUFACTURER / SUPPLIER EMERGENCY TELEPHONE NUMBERS:
RectorSeal Chemtrec 24 hours: (800) 424-9300
2601 Spenwick RectorSeal: (713) 263-8001
Houston, Texas 77055 USA
NON EMERGENCY TELEPHONE NUMBERS:
Technical Service: (800) 231-3345
SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS
APPROX
HAZARDOUS COMPONENTS CAS NO. % OSHA PEL ACGIH TLV OTHER LIMITS HMIS NFPA
Petroleum Oil 64742-44-5 -- 5 mg/m3 5 mg/m3 N/A N/D N/D
SECTION 3 HAZARDS IDENTIFICATION
SUMMARY OF ACUTE HAZARDS Repeated inhalation may cause dizziness and nausea. Ingestion may cause cramps and diarrhea.
PRIMARY
ROUTE OF EXPOSURE SIGNS AND SYMPTOMS ROUTE(S)
INHALATION: Upper respiratory tract irritation and dizziness. Yes
EYE CONTACT: Irritation. Yes
SKIN CONTACT: Irritation, dermatitis. Yes
INGESTION: Gastro-intestinal irritation, nausea, cramps, vomiting, diarrhea, aspiration into lungs can cause No
chemical pneumonitis.
SUMMARY OF CHRONIC HAZARDS: Prolonged skin contact may result in irritation and dermatitis. Prolonged eye contact may result in irritation or
chemical burns.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: N/D
SECTION 4 FIRST AID MEASURES
INHALATION: If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed.
Obtain emergency medical attention. Prompt action is essential.
EYE CONTACT: Immediately flush with large amounts of water for at least 15 minutes. Get prompt medical attention.
SKIN CONTACT: Wash with soap and water. Remove contaminated clothing. If irritation occurs, seek medical attention.
INGESTION: If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person.
SECTION 5 FIRE FIGHTING MEASURES
FLASH POINT: 148°F (64°C) SETA CC FLAMMABILITY LIMITS: LEL: N/D UEL: N/D
EXTINGUISHING MEDIA: Foam, dry chemical, carbon dioxide or water fog.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained full face piece breathing apparatus and other protective clothing. Hazardous
decomposition products possible (see Section 10). Dike fire control area as run-off may create additional fire hazard and environmental
contamination.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Combustible – moderate flash point. Vapors heavier than air and may travel along the ground or to
low spots at considerable distances to a source of ignition resulting in potential flashback. Burning liquid may float on water. Heat may build up
pressure and rupture containers.
SECTION 6 ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Use absorbent materials to prevent
footing hazard and to contain. Ventilate area with natural or explosion-proof, forced air ventilation. Avoid flushing into sewers, drains, waterways,
and soil. Wear protective clothing and respiratory protection during cleanup.
SECTION 7 STORAGE AND HANDLING
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep container closed and upright when not in use. Do not store near heat, sparks,
or open flames.
OTHER PRECAUTIONS: Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and
observe all products precautions. Do not reuse empty containers. KEEP OUT OF REACH OF CHILDREN.
MATERIAL SAFETY DATA SHEET- ACID-AWAYŌ
MSDS0165
Ver. No.1
Ver. Date December 8, 2000
Page 2 of 2
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
RESPIRATORY PROTECTION (SPECIFY TYPE): In confined poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air
purifying or supplied air respirators.
VENTILATION – LOCAL EXHAUST: Acceptable SPECIAL: Explosion-proof equipment.
MECHANICAL (GENERAL): Preferable OTHER: N/A
PROTECTIVE GLOVES: Rubber or neoprene. EYE PROTECTION: Chemical splash goggles (ANSI Z-87.1 or equivalent).
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Coveralls recommended.
WORK/HYGIENIC PRACTICES : Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving
work area. Launder contaminated clothing before reuse.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT: 320°F (160°C) @ 760mm Hg SPECIFIC GRAVITY (H20 = 1): 0.9
VAPOR PRESSURE (mm Hg): <5 @ 68°F (20°C) MELTING POINT: N/A
VAPOR DENSITY (AIR = 1): >5 EVAPORATION RATE (ETHYL ACETATE = 1): < 1
SOLUBILITY IN WATER: Insoluble APPEARANCE/ODOR: Pale Yellow Oil/Petroleum Odor
VOLATILES, PERCENT BY WEIGHT: <3%
SECTION 10 STABILITY AND REACTIVITY
STABILITY: Stable
CONDITIONS TO AVOID: Heat, sparks, open flames, and strong oxidizing conditions.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizing materials.
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2 and fragmented hydrocarbons.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11 TOXICOLOGY INFORMATION
CARCINOGENICITY: NTP: No IARC MONOGRAPHS: No OSHA REGULATED: No
SUBSTANCE CAS NO. LD50 LC50
Petroleum Oil 64742-44-5 N/D N/D
SECTION 12 ECOLOGICAL INFORMATION
FOOD CHAIN
SUBSTANCE CON POTENTIAL WATERFOWL TOXICITY BOD AQUATIC TOXICITY
Petroleum Oil N/D N/D N/D N/D
SECTION 13 DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: Dispose of clean up materials and liquid waste in accordance with all local, state and federal regulations.
SECTION 14 TRANSPORTATION INFORMATION
DOT: N/A
OCEAN (IMDG): N/A
AIR (IATA): N/A
WHMIS (CANADA): N/A
SECTION 15 REGULATORY INFORMATION
SUBSTANCE SARA_313 TSCA INVENTORY CERCLA_RQ RCRA CODE
Petroleum Oil No Yes N/A N/A
SECTION 16 OTHER INFORMATION
This document is prepared pursuant to the OSHA Hazard Communication Standard (29 CFR 1910.1200). The information herein is given in good
faith, but no warranty, express or implied is made. Consult RectorSeal for further information: (713) 263-8001